HIKVISION D0T PIR Series User Manual - Page 7

Browse online or download pdf User Manual for Security Camera HIKVISION D0T PIR Series. HIKVISION D0T PIR Series 17 pages. Turbo hd bullet camera
Also for HIKVISION D0T PIR Series: User Manual (16 pages)

Print Page

Figure 2-2 !ttach the Mounting ase to the eiling

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are required



to fix the camera. For wooden wall/ceiling, self

tapping screws are required

Route the cables through the cable hole, or the side

opening;

6. A

lign the camera with the mounting base, and secure

the camera on the mounting base.

Figure 2-3 Secure the amera with Mounting ase

7. onnect the corresponding cables, such as power

cord, and video cable;

8. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle; If not,

adjust the camera according to the figure below to get

an optimum angle;

Pan Position

[0° to 360°]

1). Hold the camera body and rotate the enclosure to

adjust the pan position [0° to 360°\;

2). Move the camera body up and down to adjust the

tilt position [0° to 75°\;

3). Rotate the camera body to adjust the rotation

position [0° to 360°\;

2.2 Mounting with Inclined Ceiling Mount

Before you start:

You need to purchase an inclined ceiling mount

separately;

Steps:

1. Paste the drill template (supplied) to the place where

you want to install the camera;

2. Drill screw holes, and the cable hole on the

ceiling/wall according to the supplied drill template;

Available from A1 Security Cameras

w.a1securitycameras.com email: sales@a1securitycamera

Expansion Bolts

Fixing Screws

Tilt Position

[0°to 75°]

Figure 2-4 3-axis !djustment

Rotation Position

[0°to 360°]