GameSir G7 User Manual - Page 4

Browse online or download pdf User Manual for Controller GameSir G7. GameSir G7 4 pages.

Print Page

1. Set M1/M2 button value: Hold the M+M1/M2 buttons simultaneously for 3s. When the

indicator blinks slowly, tap the button you want to map to M1/M2. The indicator turns solid to

indicate M1/M2 button value is set.

2. Cancel M1/M2 button value: Hold the M+M1/M2 buttons simultaneously for 3s. When the

indicator blinks slowly, tap M1/M2 button. The indicator turns solid to indicate M1/M2 button

value is canceled.

JOYSTICKS & TIGGERS CALIBRATION

1. Hold the View

+ Menu

+ Xbox buttons until the USB-C cable is inserted into the PC's USB

port. The indicator will slowly blink white.

2. Ensure that LT & RT and the left & right joysticks are not touched. Then Press the A button. The

indicator will go out.

3. Press LT & RT to their maximum travel. Rotate the joysticks at their maximum angles for 3

times. Press the A button. The indicator becomes solid white to indicate the calibration is over.

4. After the calibration is over, it's required to unplug and replug the controller before using.

CUSTOMIZATION VIA "GAMESIR NEXUS" SOFTWARE

Download "GameSir Nexus" software at Microsoft Store on Xbox/PC or gamesir.hk

Use the "GameSir Nexus" software to upgrade firmware and create 3 custom profiles. The profile

includes button mapping, joystick & trigger zones adjustment, vibration level control, etc.

*If the M1/M2 button value set in the software is different from the manual setting, the latest

setting shall prevail, and the former will be directly overwritten.