Majestic MARQUIS MARQ36IN-B Glass Refractory Installation Instructions - Page 2

Browse online or download pdf Glass Refractory Installation Instructions for Indoor Fireplace Majestic MARQUIS MARQ36IN-B. Majestic MARQUIS MARQ36IN-B 5 pages.

Print Page

4. To begin the install of the rear light cover, first remove

the back center screw that fastens the inner glass as-

sembly down to the bottom of the firebox. Retain this

screw as you will need to refasten it in later step. Lay

the rear light cover down on the inner glass assembly

but underneath the light cover. See Figure 3.

REAR LIGHT COVER

INNER

LIGHT COVER

GLASS

ASSEMBLY

Figure 3 Installing Rear Light Cover

5. The rear light cover should slide between the inner

glass assembly and the light cover so that the clear-

ance hole of the rear light cover lines up with the hole

of the inner glass assembly where you removed the

screw back in Step 4. You may want to lift up on the

light cover so that the rear light cover can fully slide

into postition underneath it.

6. Refasten the screw that you had saved before from

the inner glass assembly. This screw will hold down

the rear light cover and the inner glass assembly down

to the firebox bottom. See Figure 4.

Figure 4 Re-install Back Center Screw

7. Locate the grate / burner assembly that had been set

aside and re-engage the burner on orifice on the back

wall of the firebox. Fasten the front grate legs down to

the firebox bottom using the existing holes and screws

you retained from Step 2.

Majestic • GLMQ36, GLMQ42 Glass Refractory Kit Instructions • 2270-933 Rev. D • 1/19

SCREW

8. Place rear white refractory spacer with the arch down

as shown in Figure 5. The holes in the spacer should

align with the screws in the firebox when installed

correctly.

Figure 5 Rear Spacer

9. Ensuring that the rear spacer is properly in place and

tight to the rear wall, install the rear glass panel with

arch down as shown in Figure 6.

Figure 6 Rear Glass Panel