Majestic MERID42IN Installation Instructions - Page 2

Browse online or download pdf Installation Instructions for Indoor Fireplace Majestic MERID42IN. Majestic MERID42IN 3 pages. Glass refractory kit

Print Page

Figure 3. Glass Refractory Brackets Bent

6. MERIDPLA Only: Place glass brackets in position

and insert screws. See Figure 4 and Figure 5 for ap-

proximate placement. Do not tighten screws at this

time. They may need adjustment once glass panels

are installed.

MERID Only: Remove one screw from the glass shield

and place the retention bracket as shown in Figure 4.

Reinstall the screw, but do not tighten completely at

this time. Repeat this step to install retention bracket

on the other side.

GLASS SHIELD

Figure 4. Retention Bracket Installed

BEND 90°

RETENTION BRACKET

(LEFT AND RIGHT SIDES)

Majestic • GL36MER, GL42MER Installation Instructions • 2502-931 Rev. B • 3/18

Figure 5. Glass Refractory Brackets Installed

BEND APPROXIMATELY 90°

LOWER LEG

Figure 6.

7. Bend rear refractory bracket as shown in Figure 6.

8. Remove the existing rear baffle by removing two

screws indicated in Figure 9.

9. Install rear glass refractory panel. The bottom of the

panel is placed behind the tabs that have been bent

upward. See Figure 7. Secure the back glass panel

with the back refractory bracket and self-tapping screw

as shown in Figure 8. Center the rear refractory brack-

et prior to attaching it. It may be necessary to bend the

lower leg of bracket slightly more until it contacts the

glass.

POSITION PANEL BEHIND

BENT TAB

Figure 7. Side View of Bent Tabs