BriskHeat ACR 3 MiniPRO Hot Bonder Instruction Manual
Browse online or download pdf Instruction Manual for Control Unit BriskHeat ACR 3 MiniPRO Hot Bonder. BriskHeat ACR 3 MiniPRO Hot Bonder 14 pages.
Print PageInstruction Manual
You must read and understand this manual
before installing, operating, or servicing this
product. Failure to understand these
instructions could result in an accident causing
serious injury or death.
Keep these instructions for future reference.
TABLE OF CONTENTS
Safety Alert Symbol .............................................. 2
Explanation of Symbols Used ............................. 2
Important Safety Instructions .............................. 3
Introduction .......................................................... 4
Package Contents ................................................ 4
Getting to Know Your ACR®MiniPRO ................. 5
Specifications ....................................................... 6
Equipment Setup and Start-up ............................. 7
Power Input ................................................... 7
Starting Up ......................................................7
Heater Output Cord Attachment ..................... 7
Temperature Sensor Attachment .................... 8
Vacuum Hose Connect ....................................8
Vacuum Venturi ................................................ 8
Touchscreen Operating Instructions ....................9
Operating Menu .............................................. 10
Starting a Program ....................................... 11
Safely Shut Down .......................................... 12
Save a Log File ............................................ 12
Print a Snapshot .......................................... 12
Hold a Program ............................................ 12
Cancel a Program with a Fall ....................... 12
Cancel a Program ........................................ 13
View Plot ...................................................... 13
Alarms ......................................................... 14
Program Menu ................................................ 14
Write a New Program ................................... 15
Edit an Existing Program.............................. 19
Delete a Program ......................................... 19
Edit an Existing Program while Running ....... 20
Change Program Password ......................... 20
System Menu .................................................. 21
Save a Single Log File to USB Drive ............ 21
Save All Log Files to USB Drive .................... 22
Delete a Single Log File ............................... 22
Delete All Log Files ...................................... 22
Save All Program Files to USB Drive ............ 23
Load All Program Files from USB Drive ........ 24
Shut Down System ....................................... 24
Change System Date and Time .................... 24
Change Language ......................................... 25
Change Administrator Password .................. 25
Delete All Program Passwords ..................... 26
Factory Settings ........................................... 26
Cleaning and Decontamination ......................... 26
Equipment Maintenance .................................... 26
Warranty .............................................................. 28
®
© BriskHeat
Corporation. All rights reserved.
®
ACR
3 MiniPRO™ Hot Bonder
SAFETY ALERT SYMBOL
The symbol above is used to call your
attention to instructions concerning your
personal safety. It points out important
safety precautions. It means
"ATTENTION! Become Alert! Your
Personal Safety is involved!" Read
the message that follows and be alert to
the possibility of personal injury or
death.
Immediate hazards which WILL result
in severe personal injury or death
Hazards or unsafe practices which
COULD result in severe personal
injury or death
Hazards or unsafe practices which
COULD result in minor personal
injury or property damage.
SAVE THESE
INSTRUCTIONS!
Additional copies
of this manual are
available upon
request.
2