Bristan Blitz BTZ BAS C Installation Instructions & User Manual - Page 12

Browse online or download pdf Installation Instructions & User Manual for Plumbing Product Bristan Blitz BTZ BAS C. Bristan Blitz BTZ BAS C 20 pages.

Print Page

Installation cont

Bath Shower Mixer

1. Identify all components are present prior to starting installation using the diagram

overleaf.

2. Slide the Plinth (7) and washer (8) onto the threaded tail of the tap body and install the

mixer body (6) to the bath.

3. Using washers (9) and the backnuts (10) secure the mixer body (6) to the bath by

tightening the backnuts (10) onto the threaded tails (a suitable spanner may be

required to fully tighten the backnuts (10).

4. Connect the hot and cold water supplies using ¾" tap connectors (not supplied).

5. Fit the shower hose (13) to the hose outlet using the small washer, and the handset (14)

to the hose using the small washer.

6. Fit the wall bracket (not shown) to the wall using the fixings supplied, ensuring the

handset (14) and hose (13) reaches it.

7. Turn the handles in both directions, letting the water flow for a few minutes to check all

joints and connections for leaks.

8. To switch from bath to shower mode, simply pull the diverter up. After use the mixer

automatically reverts to the bath filling mode.

NOTE: The mixer incorporates a 'lock-up' diverter feature, for use with low pressure

water systems. Simply twist the diverter knob when in the up position to lock in the

shower mode. After use twist back to allow diverter knob to drop back down to bath

filler mode

Grub Screw Cap

Grub Screw

Handle

Handle Lever

Valve

Mixer Body

Plinth

Washer

10.

Backnut

11.

Diverter Mechanism & Knob

12.

Flow Straightener

13.

Shower Hose

14.

Handset