Bristan Blitz BTZ BAS C Installation Instructions & User Manual - Page 15

Browse online or download pdf Installation Instructions & User Manual for Plumbing Product Bristan Blitz BTZ BAS C. Bristan Blitz BTZ BAS C 20 pages.

Print Page

Maintenance cont.

Cleaning the Valves – Basin Taps, Bath Tap, Bath Filler and Bath Shower Mixer

We advise that your fitting is regularly

serviced in hard water areas to maintain

optimum performance (see map of Hard

Water Regions in the UK on page 17.

If your fitting begins to leak the following

should be carried out;

Isolate both hot and cold water supplies to

the tap by either:

• Turning the water supply off at the mains

stopcock or

• Turning off the isolation valves to the tap.

1. Remove the cap at the rear of the handle

to reveal the concealed grub screw.

2. Unscrew the grub screw and pull the

handle upwards from the valve spindle.

3. Using a suitable spanner remove the valve

from the tap body.

4. Clean the valve and the seating inside the

tap body.

5. If necessary replace the valve.

Please visit www.bristan.com/sparesfinder in

order to find spare parts for this product.

6. Replace the valve into the tap body and

tighten fully using a suitable spanner.

7. Replace handle assembly.

8. Turn on water supply and check for leaks.

11. Contact our helpline should if problem

persists.

Cap

Grub Screw

Handle

Handle Lever

Valve

Tap Body