Adexa AP238- PS15- 36 Installation Manual / Use And Care Manual - Page 13

Browse online or download pdf Installation Manual / Use And Care Manual for Ventilation Hood Adexa AP238- PS15- 36. Adexa AP238- PS15- 36 20 pages. Under-mount hood

Print Page

INSTALLATION

(continued)

Step 2:

For safety purpose, pre-drilled mounting holes are provided through the back of the hood. For a more

secure installation, use as many mounting holes as needed to secure from the inside of hood.

Use an 8" round metal pipe (follow building codes in your area) to connect the exhaust on the hood

to the ductwork above, as illustrated in figure 4. Use duct tape to make all joints secure and airtight.

Step 3:

Step 4:

Turn power ON in control panel. Check all lights and fan operations.

Drop oil tunnel into recess support near rear of

hood. See figure 8.

Figure

To install baffle filters and stainless spacer(s), refer to

figure 9 and follow these five steps:

Angle filter toward back of

hood. Push filter up until

almost level.

Slide forward into recess behind the front of

hood. Lower filter.

Slide back until it fits into resting position.