Adexa AP238-PS83-36 Installation Manual / Use And Care Manual - Page 8
Browse online or download pdf Installation Manual / Use And Care Manual for Ventilation Hood Adexa AP238-PS83-36. Adexa AP238-PS83-36 20 pages. Under-mount hood
Print Page
BEFORE INSTALLING THE HOOD
For the most efficient airflow exhaust, use a straight run or as few elbows as possible.
Vent unit to the exterior only.
At least two people are required for installation.
Remove the range hood from the carton packaging and place on a flat surface for assembly.
CAUTION
THIS APPLIANCE SHOULD BE PROPERLYGROUNDED.
The range hood must be connected with copper wire/plug only.
Make sure the unit is connected to an individual, properly grounded circuit.
If the electrical supply does not meet above requirements, call a licensed electrician before proceeding.
Route house wiring as close as possible to the installation location, in the ceiling or back wall.
The hood must be connected to the house wiring in accordance with the local codes and norms.
WALL FRAMING FOR ADEQUATE SUPPORT
THIS VENT HOOD IS HEAVY. ADEQUATE STRUCTURE AND SUPPORT MUST BE PROVIDED IN ALL TYPES OF
INSTALLATION. IF MOUNTING ONTO DRY WALL, IT IS RECOMMENDED THAT THE HOOD BE SECURED TO
VERTICAL STUDS IN THE WALL OR TO A HORIZONTAL SUPPORT.
WARNING
BE CAREFUL WHEN INSTALLING THE HOOD, AS IT MAY HAVE SHARP EDGES. WE RECOMMEND THAT YOU
WEAR PROTECTIVE GLOVES.
CAUTION
DO NOT REMOVE THE PROTECTIVE PLASTIC FILM COVERING THE HOOD AT THIS STAGE.
8