Aguilar DB 750 Manual - Page 4

Browse online or download pdf Manual for Musical Instrument Amplifier Aguilar DB 750. Aguilar DB 750 6 pages. Tube bass head

Print Page

Master Output Control:

This pot controls the output level to your power amp.

XLR Balanced Output:

Use the –30dB pre-eq setting in a concert situation where the house mixer is taking a signal into

the house-mixing console. The house mixer is now getting his feed after the preamp stage, but

can use appropriate eq for the venue. The eq on stage will still be controlled by your settings. If

the house mixer wants your eq settings included in the mix, set the control to –30 post eq. The –

30 level is correct output level for going into a preamp on a mixer. Our balanced output uses the

highest quality Jensen output transformer. If you hear any ground noise, change the position of

the ground lift switch under the output

OUTPUT INTERFACES:

Rear Panel:

Speakon Connectors:

Two speakon connectors are provided. Use 12 gauge or larger speaker cable for proper

connections.

FX Send:

Connect the input of your effects unit to this output.

FX Return:

Connect the output of your effects unit to this input.

Footswitch:

Use the Aguilar footswitch to mute the signal for silent tuning.

Preamp out:

Full range preamp output allows you to run into another poweramp in conjunction with your

DB750.

Poweramp in:

The DB750 can be used as a stand alone poweramp or for slaving two DB750s together.

Tuner out:

A ¼ inch jack that sends a signal to your tuner.