Majestic M7550H Assembly Instruction
Browse online or download pdf Assembly Instruction for Musical Instrument Majestic M7550H. Majestic M7550H 2 pages. 4.3 & 5.0 octaves deluxe / artist / professional marimba
Assembly Instruction
4.3 & 5.0 OCTAVES
DELUXE / ARTIST / PROFESSIONAL
MARIMBA
W W W . M A J E S T I C - P E R C U S S I O N . C O M
Ver. 201307
I. Components
P1
9
8
5
1
7
6
3
2
11
12
4
10
14
15
18
19
13
16
17
P4
● Assemble side frames
Standing in the playing posiition with the wheel with
break facing you, set the bass end side frame on top
of the leg assembly. Match the holes with the knob
screws, then tighten with moderate pressure. Repeat
this process at treble end.
Treble End (small end) is to your right, Bass End
(Large End) is to your left.
For 4.3 Oct Model
For 5.0 Oct Model
P2
Item Parts Description
1
Leg Assembly - Bass End x 1
2 Leg Assembly - Treble End x 1
3 Center Cross Bar x 1
4 Leg support x 2
5 Side Frame – Bass End x 1
6 Side Frame – Treble End x 1
7 Rails (no.1~ no.4) x 4
8 Resonator- Naturals for 4.3 Oct Model x 2
9 Resonator- Accidentals for 4.3 Oct Model x 2
10 Tone Bars-Naturals x 1
11 Tone Bars-Accidentals x 1
12 Protective Cover x 1
13 Mallets x 1
Resonator For 5.0 Oct Model
14 Resonator-Naturals Bass-section x 1
15 Resonator-Accidentals Bass-section x 1
16 Resonator-Naturals Mid-section x 1
17 Resonator-Accidentals Mid-section x 1
18 Resonator-Naturals Treble-section x 1
19 Resonator-Accidentals Treble-section x 1
P5
● Assembly rails
Using labels on rails and frame end brackets as guide,
attached rails to corresponding position on the side
frame. Numbering are labeled on bass end of rails and
side frame.
Please begin assembly rails with sequence of
no.3 → no.2 → no.1 → no.4.
For 4.3 Oct Model
For 5.0 Oct Model
II. Build the frame
P3
Assembly leg
●
Begin the process by assembling leg support to
center crossbar with provided knob screw.
With Bass End Leg Assembly lying flat on the ground,
place the Center Cross Bar in to square housing at
position (A) and position (B). Align the hole, insert
knob screw in and tighten with moderate pressure.
Set the Bass End Leg Assembly upright, cross bars
are horizontal to ground, repeat the process on Treble
End Leg Assembly.
Engage brakes before setting Leg Assembly in upright
position. This will provide stability and traction. Wheels
with brake should be positioned facing playing side.
A
B
III. Set up Resonators
P6
● Attach resonators
Resonators are setup under the frame. Pick up one
resonator, make sure suspension arms is at open
position; attach resonator set by seating arms firmly
into notches on side frame & rails.
For 4.3 Oct Model
For 5.0 Oct Model