Bristan Pivot Series Installation Instructions Manual - Page 8
Browse online or download pdf Installation Instructions Manual for Plumbing Product Bristan Pivot Series. Bristan Pivot Series 16 pages. Tap
Print Page
Installation
3 Hole Basin Mixer & Bath Filler
1. With the backnut, metal and rubber
washer fitted to the side body threaded
tail, feed the side body through the hole
in the basin/ bath from underneath and
secure in position by screwing the plinth
onto the side body valves, ensuring that
the washers are fitted between the plinths
and the basin/ bath to create a water tight
seal.
2. Secure the side bodies to the basin/
bath by tightening the backnuts and the
washers up to the underneath of the
basin/ bath.
3. Screw the valve shrouds onto the side
body valves.
4. Fit the handles onto the valves and
secure by tightening the grub screws.
Push fit the caps.
5. Remove the washers and the backnut
from the spout threaded tail. Fit the spout
to the basin/ bath ensuring that the
washer is fitted between the spout and
the basin/ bath to create a water tight
seal. Secure the spout to the basin/ bath
using the washers and metal backnut.
Tighten the backnuts onto the threaded
tail. A suitable spanner may be required
to fully tighten the backnut.
6. Connect the hot and cold water
supplies to the side bodies (hot to the left,
cold on the right hand side).
8
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.