IKEA ENHET Installation Manual - Page 8
Browse online or download pdf Installation Manual for Indoor Furnishing IKEA ENHET. IKEA ENHET 10 pages. Kitchen
Also for IKEA ENHET: Installation Manual (16 pages), Installation Manual (20 pages)
Building a kitchen island
When it comes to building a kitchen island, it is impor-
tant to consider some key aspects during the planning
and installation. Since the kitchen island will not be
supported by the walls, the frames need to be at-
tached to the floor to prevent the island from tipping
or moving around. For ENHET, you can build a kitchen
island using the open frames along with the assembly
kit for kitchen island.
Start by deciding where the island will be positioned.
For a straight island that aligns with the rest of
We recommend that you leave 120 cm between the
the kitchen, use reference points in the room (for
island and the other kithen units to ensure a good
example base cabinets).
workflow in the kitchen.
Once you have positioned the frames, add some
Use the anchoring metal brackets included in the
temporary tape underneath each leg and mark the
assembly kit for kitchen island to secure the kitchen
perimeter of each leg sleeve as accurately, since this
island to the floor.
will be the final location of your kitchen island.
Measure and resize the worktop if needed. As you
place it on top of the island, make sure your have an
equal overhang all around. Then, attach it using the
brackets provided with your base unit.
14
Before fixing the island to the floor, assess your
floor and make sure the fixation points of the
island do not conflict with floor heating, or elec-
trical lines hiding underneath the floor.
Fixing devices for the floor are not included
since different floor materials require different
types of fixing devices. For advice on suitable
fixing devices for your floor, contact your local
specialised dealer.
Make sure you assemble the cabinet stabilisers onto
the frames according to the assembly instruction
that comes with the assembly kit for kitchen island.
After you have slid the legs into the anchoring
fittings, connect all frames, using the connectors
included with the frames. We recommend that you
use a large spirit level to check that the cabinets are
level in all directions. To make minor adjustments,
adjust the height of the legs.
You're done! Congratulations
on your new kitchen!
Time to step back and admire your new kitchen. With
a little care and maintenance, your IKEA kitchen will
look great for many years to come.
Caring for your cabinets
Clean the doors, cabinet interiors and wood surfaces
with a soft, damp cloth. Only use cleaning products in-
tended for these materials. Do not use products that
contain ammonia, alcohol, bleach or abrasives. Rinse
with clean water, then dry with a clean, dry cloth.
Make sure to clean up spills quickly.
Keep your sink sparkling
After each use, wipe the sink clean with a cloth or
sponge damped in water or a non-abrasive detergent,
if necessary. Rinse the bowl with water and then wipe
the sink with a dry cloth. Avoid scouring powder, steel
wool, or hard objects which can scratch the stainless
steel surface. The damp surface can be discoloured if
substances containing iron, such as steel wool, nails
or gravel, are allowed to remain on it. Discolouration
is caused by the foreign material.
Long-lasting worktops
Keep your worktop in top condition by cleaning spills
quickly with water and a mild detergent. Be sure to
keep them as dry as possible after use. For wood and
solid wood worktops use STOCKARYD wood treat-
ment oil. The oil protects the wood from marks, stains
and cracks, and prevents water from penetrating the
surface.
15