IKEA ENHET Installation Manual - Page 7

Browse online or download pdf Installation Manual for Indoor Furnishing IKEA ENHET. IKEA ENHET 16 pages. Kitchen
Also for IKEA ENHET: Installation Manual (10 pages), Installation Manual (20 pages)

Print Page

Installing wall cabinets/frames

In most kitchens it's best to install your wall cabinets

and frames first. This way you have room to move

without base cabinets in the way.

If you have a rangehood placed under a cabinet,

you need to make some cut-outs in the cabinet

before you place it on the wall. Follow the assembly

instruction of the rangehood to prepare the required

cut-outs, and remember to seal the open edges

with silicone.

Proceed with the next cabinet, using a clamp to align

the two cabinets before you screw them together

with the screws enclosed with the cabinet.

Start cabinet installation from the corner of your

room. Place the cabinet on top of the supporting

strip and slide it into position.

As you place the cabinet adjusted for the rangehood,

make sure you can access the electrical outlet via the

previously made cut-out.

Reminder

Fastening/fixing devices (screws and plugs)

for the wall are not included with the cabinets

and frames since different wall materials

require different types of fastening devices.

Use fastening devices suitable for the walls

in your home. For advice on suitable fastening

devices, contact your local specialised dealer.

Fix the cabinet using the appropriate length and

type of screw. Throughout the installation process

you may need to loosen the screws to make small

adjustments when aligning cabinets and frames.

When you have placed and aligned all cabinets and

open frames, it is time to secure them in their final

location. Before you tighten all screws a final time,

use the level to check that all angles are straight.