Majestic Appliances PN17-1021 Instruction Manual - Page 10
Browse online or download pdf Instruction Manual for Dishwasher Majestic Appliances PN17-1021. Majestic Appliances PN17-1021 15 pages.
Cleaning
the Spray
Arms
It is necessary
to clean the spray arms regularly
for hard water chemicals
will clog the spray arm jets and bearings.
"Toremove the
spray arm, screw offthe nut to take out the washer on top of the spray arm and remove the arnt Wash the arms in soapy and warm
water and use a soft brush to clean the jets Replace them after rinsing them thoroughly,
A WARaXglNG!
Cleaning
the Filters
Filter assembly
For best performance
and results,
the filter assembly
must be cleaned.
"fhe filter efficiently
removes
food particles
fl'om the wash water, allowing
it to be recirculated
during the cycle: For this reason,
it is a good idea to remove the larger food particles
trapped in
the filter after each wash cycle by rinsing the semicircular
filter and cup under running water
To remove the filter assembly,
pull on the cup handle in the upward direction
'The entire filter
assembly
should be cfeaned at least once a month
To clean the coarse
filter and the fine filter, use a cleaning brush Then, reassemble
the filter
parts as shown in the figures Ieft and reinsert
the entire assembly in the dishwasher,
positioning
in its seat and pressing
downward
The dishwasher
must never be used without the filters
Improper replacement
of the filter may
reduce the performance
level of the appliance
and damage dishes and utensils
Never run the dishwasher without the filters in piace
Cleaning
the Door
To clean the edge around the door, you should use onty a soft warm, damp rag T 9 prevent
penetration
of water into the door lock and electrical
components,
do not use a spray cleaner
of any kind
AIso, never use abrasive
cleaners
or scouring
pads on the outer surfaces because they will
scratch the finish
Some papers towels can also scratch or leave marks on the surface
Cleaning
the Drain Pump
Something wilt occasionally
move into the filters and the drain pump if this occurs, the drain pumps
employed in our dishwashers
are designed
to automatically
reverse, ejecting
the item back into the
sump area or down the drain. If you have to remove an obstacle
from the drain pump, before you
remove the filters, you should
turn offthe
power;
Then remove the small black insert from the sump
area (You might want to remove arty standing
water first). Scoop out the item that is probably
in the
sump area and causes the obstruction
Remember
to replace the black insert before you put the filters
back in
How to Keep Your Dishwasher
in Shape
!L After
Every
Wash
After every wash, turn off the water supply to the appliance
and leave the door slightly ajar so that moisture
and odors
are not trapped inside,
;;,> No Solvents
orAbrasive
Cleaning
Products
When
You Go on Holiday
When you go on holiday, it is recommended
that you run a
wash cycle with the dishwasber
empty and then remove
the plug from the socket, turn offthe water supply and
leave the door of the appliance slightly ajar This will help
the seals last longer and prevent odors from forming
within the appliance
To clean the exterior and rubber parts of the dishwasher,
do
not use solvents or abrasive cleaning products.
Rather,
use
only a cloth and warm soapy water. To remove spots or
stains from the surface ofthe interior, use a cloth dampened
with water and a little white vinegar, or a e_eaning product
made specifically
fbr dishwashers
Seals
One of the factors that cause odors to form in th'e
dishwasher
is food that remains trapped in the seals
Periodic
cleaning with a damp sponge will prevent
this
from occurring