JAI BM-500 GE User Manual - Page 10

Browse online or download pdf User Manual for Machine Vision Systems JAI BM-500 GE. JAI BM-500 GE 20 pages. Digital monochrome / color progressive scan gige vision camera

Print Page

Locations and Functions

4.1

Locations and functions

①

 Lens mount

 CCD sensor

 12-pin connector

 D-sub 9 pin connector

 RJ-45

 LED

 LED

 Holes for RJ-45 thumbscrews

 Holes for RJ-45 thumbscrews

 Mounting holes

*1) Note:

Rear protrusion on C-mount lens must be less than 10.0mm.

*2) Note:

When an RJ-45 cable with thumbscrews is connected to the camera, please do

not excessively tighten screws by using a screw driver. The RJ-45 receptacle on

the camera might be damaged.

For security, the strength to tighten screws is less than 0.291 Newton meter

(Nm). Tightening by hand is sufficient in order to achieve this.

*3) Note:

The tripod adapter plate MP-41 can be used with BM/BB-500GE

BM-500GE / BB-500GE

⑩

②

C-mount (Note *1)

2/3 inch CCD sensor

DC +12V power and GPIO interface

Auxiliary GPIO interface (LVDS IN and TTL IN/OUT)

GigE Vision I/F. Accepts connector w thumbscrews.

GigE Network condition: LINK

GigE Network condition: ACT

Vertical type (above and below RJ-45).

Horizontal type (left and right of RJ-45) (Note *2)

M3 depth 5 mm for tripod mount plate (Note *3)

Fig. 1. Locations

④

③

D CIN/ T R IG

P O W E R/ TR IG

⑥

LINK

A C T.

⑦

G igE

⑤

⑧ ⑨