Bristan MT503CP Installation Instructions And User Manual - Page 5

Browse online or download pdf Installation Instructions And User Manual for Control Unit Bristan MT503CP. Bristan MT503CP 12 pages. Temperature stabilised thermostatic mixing valve

Print Page

Installation

IMPORTANT: Please ensure both supply pipes are flushed before connecting the

mixing valve to prevent plumbing/pipe debris from entering the mixing valve.

Also ensure that the mixing valve is situated in a place where the commissioning,

testing and maintenance of to TMV standards can be undertaken.

Please read the TMV guide supplied with this product for more information.

If you have purchased MT503CP; we advise installing isolation valves as close as its

practical to the mixing valve for ease of maintenance.

Please check component drawings for completeness before starting installation.

1. Plumb the pipes to the desired

location for the mixing valve,

ensuring that they're secure in

position.

2. Connect the valve to the pipework,

We recommend using a high

tightening torque (45-50Nm) on

all compression fittings to secure

the valve.

IMPORTANT: Please ensure both

supply pipes are flushed before

connecting the mixing valve to

prevent plumbing/pipe debris from

entering the mixing valve.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Remember: Ensure the valve is fitted

with the hot inlet on the left, cold

on the right when viewed from the

front.

3. Connect your chosen outlet to the

mixing valve. Turn on the water

supply and check all joints and

connections for any leaks.

4. Please refer to the TMV guide in

order to test and commission the

mixing valve.