Bristan CAP BID C Installation Instructions & User Manual - Page 10

Browse online or download pdf Installation Instructions & User Manual for Water Dispenser Bristan CAP BID C. Bristan CAP BID C 12 pages.

Print Page

6.Maintenanc

e e e e

General Cleaning

Your fitting has a high quality finish

and should be treated with care to

preserve the visible surfaces. All

finishes will wear if not cleaned

correctly. The only safe way to clean

your product is to wipe with a soft

damp cloth. Stains can be removed

using washing up liquid. All bathroom

cleaning products (powders and

liquids) will damage the surface of

your fitting, even the non-scratch

cleaners.

Note: Never use abrasive detergents

Note:

or disinfectants or those containing

alcohol, hydrochloric acid or

phosphoric acid.

Bristan recommend E-cloth for cleaning all of our bathroom & kitchen

products. Using just water, E-cloth gives a smear free, deep clean by breaking

up and hold dirt, which normal cloths leave behind. Order through your

Bristan stockist (order code: ECLOTH).

Maintenance

If your fitting begins to leak the following

should be carried out;

1. Remove the handle by prising out the

cap and then loosening the screw. Pull the

handle from the spline of the valve /

cartridge.

2. Remove the valve from the body by

unscrewing it, If cartridge – unscrew the

cartridge retaining nut and then pull the

cartridge from the body.

3. Clean the washer and seating and

replace valve / cartridge if necessary.

4. replace the valve / cartridge

Note: The cartridge has locating pins on

Note:

the underside which fit into holes in the

body.

4. Replace the handle, tighten the screw

and push the cap back in.

If the problem persists please contact our

customer services department quoting the

product code.