Bristan IRSD1-BN Installation Instructions And User Manual - Page 9
Browse online or download pdf Installation Instructions And User Manual for Dispenser Bristan IRSD1-BN. Bristan IRSD1-BN 16 pages. Infrared automatic soap dispensor
Also for Bristan IRSD1-BN: Installation Instructions And User Manual (16 pages)
Print Page
Commissioning
Commissioning Sequence
Before using the soap dispenser for the
first time the following sequence must be
carried out.
Fill the bottle full of liquid soap. Refer to
specification section on page 3 for the
correct liquid soap to be used.
Locate the dispense button on the side of
the pump. Press and hold the button until
soap is dispensed from the spout. This
will ensure the dispenser tube and cable
are full of liquid soap.
Selecting Volume Adjustment
The soap dispenser has four dispense
volume adjustment settings. Each
adjustment setting dispenses a different
volume of liquid soap.
Volume Adjustment
Setting
Low
Normal
Medium
High
To adjust the volume of soap dispensed
follow the steps below.
Locate the volume adjustment switches
under the rubber cover.
Set the switches to the required position
for the desired volume adjustment setting.
Refer to the switch position diagrams.
Volume of liquid
soap (ml)
0.5
1
1.5
2
Dispense
Button
Volume Adjustment Switch Positions
Volume
adjustment
Low: 0.5 ml
Switch 1: Off
Switch 2: Off
Normal: 1 ml
Switch 1: Off
Switch 2: On
Midium: 1.5 ml
Switch 1: On
Switch 2: Off
High: 2 ml
Switch 1: On
Switch 2: On
9