Centrometal CentroPelet ZV14 Technical Instructions - Page 5
Browse online or download pdf Technical Instructions for Pellet stove Centrometal CentroPelet ZV14. Centrometal CentroPelet ZV14 12 pages.
Also for Centrometal CentroPelet ZV14: Technical Instructions (12 pages)
Print Page
REMARKS:
In case of repeated ignition lock-outs, while pellets are fed
regularly, there may be a problem caused by a failing elec-
tric glow plug. In this case, while you wait for a technician,
the pellet boiler stove can be manually started by using so-
lid fuel cubes (firelighters).
Manual starting procedure:
Do not use any flammable liquid to start the stove.
During the reload phase, do not bring the bag of pellets
in contact with the hot pellet boiler stove.
Working power and water temperature settings
The heating power is set by the
and
. A heating po-
keys
wer at Po 9 is suggested during
the first working hours of the stove.
To set the water temperature
press the key
only once. You
will see the words
king on the upper display. You
will read the water temperature
on the lower display.
Use the keys
and
wished value.
Water temperature range: 30°C – 80 °C
Room temperature setting
To set the room temperature,
press the key
twice: you
will see the words
king on the lower display. You will
read the set temperature on the
upper display.
Use the keys
and
change the value.
Room temperature range: 7°C – 40 °C
CAUTION!
blin-
to increase and reduce the
blin-
to
Procedure to turn off the pellet boiler stove
Turn off the pellet boiler stove by
pressing button
, for a couple
of seconds until
on the upper display.
Pellet feeding will stop immediately but the pellet boiler stove
-
will continue working until the accumulated heat is fully consu-
med, turning itself off automatically after approx. 30 minutes.
REMARKS:
The pellet boiler stove is fitted with
an automatic device that allows clea-
ning the brazier after a given period of
time: when this time is detected, the
stove fire automatically reduces and
is shown on the display. After
some minutes, the pellet boiler stove
will start working regularly.
Do not unplug the power plug to turn off the pellet boiler sto-
ve; wait until the automatic shutdown cycle finishes: the con-
tinuous operation of the fumes extraction fan is normal and
may indicate that the stove is still hot. In the event of low tem-
peratures, it might happen that the stove - although switched
off - starts the smokes fan and circulator for some minutes in
order to prevent ice formation on the pipes of the system. in
the event there is a power drop, the main board will exhaust
the smokes residuals as soon as the power supply is back on.
In order to do that, the main board will increase the speed and
show the words "Cool FIRE" on the display. As soon as the co-
oling phase has been completed, the stove will automatically
start up working as it was set before the power drop.
is shown
WARNING