Gamma 6004 Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Stringing Machines Gamma 6004. Gamma 6004 19 pages. 6 point mounting
Also for Gamma 6004: Owner's Manual (20 pages), Owner's Manual (20 pages), Owner's Manual (20 pages)

Print Page

MOUNTING THE FRAME

Securing the Shoulder Supports

Secure the racquet frame with the shoulder

supports by rotating the large adjustment

knobs on the outside of the support post

assemblies clockwise. Adjust the supports

until firm contact is made between the shoul-

der supports and the frame.

The tear drop shaped holes torwards the

back of the shoulder supports are handy for

holding the loose end of the string while

pulling the string through the racquet. Simply

insert the loose end into the tear drop shaped

holes and slide the string into the point of the

hole.

Shoulder Support Adjustment

The shoulder supports are adjustable to

provide support to the racquet frame. Swivel

the support so that the pads will contact the

frame squarely when the arms are closed

against the racquet. Should the shoulder

supports block string holes, adjust the posi-

tion of the racquet between the arms until the

shoulder supports contact the racquet be-

tween grommet holes.

Frame Support Slide Adjustment

The Frame Support Slide should only be

adjusted if the Shoulder Supports are blocking

a grommet hole. Never unscrew the Frame

Support Slide past the machined line on the

lower horizontal portion.

Apply a final adjustment to all racquet support

points until the racquet is firmly secured in the

mounting system.

Should the frame supports lose contact with

the frame while stringing, they should be

adjusted, as needed, to maintain contact with

the frame.