Gamma PRO 100 Owner's Manual - Page 8

Browse online or download pdf Owner's Manual for Stringing Machines Gamma PRO 100. Gamma PRO 100 11 pages.

Print Page

STRINGING THE FRAME

Pulling Tension

While holding the string gripper drum with

your hand, lift the tension bar to approx. 45

degree angle and let fall. If the tension bar

drops below horizontal, repeat the above

action until the bar comes to rest parallel to

the racquet. The set tension will be reached

when the bar rests horizontal.

If the bar comes to rest above horizontal,

release the string and re-pull tension.

Manually forcing the bar into the horizontal

position will greatly increase string tension

and may result in racquet damage.

Clamping the String

Clamp the tensioned string to the next adja-

cent string using the secong string clamp.

Release the tensioned string by raising the

tension arm.

Repeat the procedure for all of the remaining

main strings and tie off following the racquet

manufacturers recommendations.

Starting the Cross Strings

Follow the manufacturer's recommended

stringing pattern for one or two piece string-

ing. This will determine the starting point for

the cross strings. Weave the first two cross

strings and pull tension as per Step 3. Clamp

the cross strings as per Step 4.