Gamma Progression 602 FC Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Stringing Machines Gamma Progression 602 FC. Gamma Progression 602 FC 16 pages.
Also for Gamma Progression 602 FC: Owner's Manual (16 pages)

Print Page

ASSEMBLY INSTRUCTIONS

Fixed Clamp Installation

To install the clamps, remove the winged lock knob to

separate the knob from the lower guide bushing. Be

careful not to lose the radial thrust bearing components

located in the center recess of the knob.

Align the clamp base with the clamp slot of the turntable

base. Insert the clamp guide bushing into the clamp from

the bottom of the turntable making sure to engage the

guide with the clamp slot.

Place the load bushing into the top of the clamp base

mating it to the lower guide bushing. After checking that

the thrust bearing is positioned correctly in the base of

the winged lock knob, screw the knob into the base

bushing until fully seated.

The post of the string clamp head and tube of the string

clamp base are treated with grease to provide protection

against corrosion during shipping. Remove any exces-

sive grease with a clean cloth prior to use. The post and

tube may also be cleaned with isopropyl alcohol. After

this type of thorough cleaning, the post and tube should

be treated with a light coating of machine oil to protect

the surfaces against corrosion and to ensure smooth

operation.