Gamma Progression Els Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Stringing Machines Gamma Progression Els. Gamma Progression Els 20 pages.
Also for Gamma Progression Els: Owner's Manual (20 pages), Owner's Manual (19 pages)

Print Page

CONTROL PANEL FUNCTIONS

AND FEATURES

Tension Index Buttons - Changes

tension setting in +/- 1.0 or +/- 0.1 Lb or

Kg increments. Holding the button down

will scroll the tension setting values up

or down. Tension settings entered with

the tension index buttons are placed into

temporary memory setting "0".

Clear Button - Clears display to enter

a new tension or to reset String Length

Meter measurement.

Test Button & Racquet Strung -

Press once for approximate number of

racquets strung. Press again to return.

Press and hold for 5 seconds and the

machine does an internal diagnostic

check, such as the one performed at

start-up.

Lbs/Kgs Button - Changes tension

display from Lbs to Kgs. Each press

of the button toggles back and forth

between Lbs and Kgs.

Pre-Stretch Function - Pulls string 10%

or 20% over the tension setting (up to 90

lbs / 40.8 kgs), releases the string, and

repulls to the tension setting. Each press

of the button toggles between 10%, 20%

or no pre-stretch.

Single Digit (1-9)

Memory LED Display

Memory Button - Indexes from 9 preset

tension settings that can be stored in

memory. Settings are retained even if

machine is turned off. Each press of

the button indexes to the next memory

setting. Memory settings 1-9 must be

entered using the keypad followed by

pressing the "ENT" button.

Enter Button - Saves displayed tension

for Memory setting - when tension is en-

tered using the keypad display flashes

until this button is pressed to save the

setting. Also Clears display for String

Length Meter measurements.

Knot Function - Increases pulling ten-

sion by 10% over the setting value (max

90 lbs / 40.8 kgs) for one pull. During the

pull the LED stays lit to indicate the Knot

function is enabled.

Speed Button - Changes pulling speed

of winder from Fast (default) to Medium

to Slow. Slow speed is recommended

for low stretch strings, such as Kevlar.

Each press of the button toggles be-

tween Fast, Medium and Slow speeds.

String Length Meter Button - feature is

currently not available.

Three Digit (XX.X)

Tension Setting Display

or String Length LED

Display