Gamma X-Els Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Stringing Machines Gamma X-Els. Gamma X-Els 20 pages.
Also for Gamma X-Els: Owner's Manual (20 pages)

Print Page

POWER CONNECTION & CONTROLS

Instructions for Power Connection and Controls

CAUTION ! Before connecting to the power supply, check the voltage source that the

machine is being connected to. The acceptable range of input voltages for this ma-

chine is between 100 V and 240 V @ 50 to 60 Hz. If you have any questions regarding

the input voltage supply for your area, please ask your electric utility company.

To install the power cord, insert the female end of the power cord into the AC Adapter and

then insert the female end of the cord from the AC Adapter into the A/C Power Cord Socket

"C" located on the back panel of the tensioner. Plug the male end of the power cord into a

grounded power outlet. When using extension cords, use grounded heavy duty extension

cords rated for 15 AMP service.

To connect the foot pedal switch, insert the male pin at the end of the foot pedal switch cord

into the Foot Pedal Switch Receptacle "B" located on the back panel of the tensioner.

Switch on the machine by pressing the Lighted On-Off Power Switch on the back panel. At

start-up, the LED will display a countdown from "9.0" to "0.0" while the machine performs a

self diagnostics check at start-up.

WARNING!

NEVER OPEN UNIT WITH POWER CONNECTED.

CHILDREN SHOULD NEVER BE PERMITTED TO OPER-

ATE THIS MACHINE WITHOUT ADULT SUPERVISION.

FOR INDOOR USE ONLY.

Front Panel Features

A - String Gripper

B - Tension Switch

C - LED Tension Display

Back Panel Features

A -

Lighted Power Switch

B -

Foot Pedal Switch Receptacle

C -

A/C Power Cord Socket

D -

String Length Meter (currently not

available)