Gamma Xenon Par User Manual - Page 3

Browse online or download pdf User Manual for Lighting Equipment Gamma Xenon Par. Gamma Xenon Par 18 pages. Ip65 led par with motorized zoom

Introduction and Setup

1.

Unpacking

After receiving the device, please check whether any visible damage was caused dur-
ing transport. lf the power cord, housing or the light are damaged, do not operate the
device. Contact your dealer or GAMMA LED Vision immediately.
Thank you for choosing our Xenon Par. This light is designed by high strength die-
casting aluminum which is able to endure high temperatures, and is designed in a
stylish form.
It uses high-power Red, Green, Blue, and White LED's and has a motorized zoom
control from 8°-50°.
For your own safety, please read this manual before installing or using the device. This
manual covers the important information on installation and applications. Please install
and operate the fixture with following instructions. Meanwhile, please keep this manual
for future needs.

In the Box:

Xenon Par LED -
Power Cable -
Wireless IR Remote -
User Manual -

Mounting and Operation

Use a clamp rated for the full weight of the Xenon Par to hang the fixture from the
mount(s) on the fixture's yoke.
As an added safety measure be sure to attached at least one properly rated safety
cable to the fixture using on of the safety cable rigging point integrated in the base
assembly or on the yoke.

Safety Precautions

Caution: For added protection mount the fixtures in areas outside walking paths, seat-
ing areas, or in areas were the fixture might be reached by unauthorized personnel.
Xenon 7x20w Zoom Par – GAMMA LED Vision
1 pc
1 pc
1 pc
1 pc
Page 3 of 18