Decimator DMON-4S Operating Manual - Page 11
Browse online or download pdf Operating Manual for Media Converter Decimator DMON-4S. Decimator DMON-4S 11 pages. Quad (3g/hd/sd)-sdi to hdmi multi-viewer and converter
6. SETUP / Demo Cycle Time (Parameter)
The Demo Cycle Time determines the amount of time to elapse before cycling to the next item. When the sub
menu is highlighted, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right through the time until the unit moves to the next item in the
cycle.
Default time is 10 Seconds, Maximum time is 256 Seconds
Note: The parameter will only be updated when leaving this sub-menu.
SERVICE WARRANTY
Decimator Design warrants that this product will be free from defects in materials and workmanship for a
period of 36 months from the date of purchase. If this product proves to be defective within this warranty
period, Decimator Design, at its discretion, will either repair the defective product without charge for parts and
labour, or will provide a replacement product in exchange for the defective product.
In order to service under this warranty, you the Customer, must notify Decimator Design of the defect before
the expiration of the warranty period and make suitable arrangements for the performance of service. The
Customer shall be responsible for packaging and shipping the defective product to a designated service centre
nominated by Decimator Design, with shipping charges prepaid. Decimator Design shall pay for the return of
the product to the Customer if the shipment is to a location within the country in which the Decimator Design
service centre is located. The Customer shall be responsible for paying all shipping charges, insurance, duties,
taxes, and any other charges for products returned to any other location.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or
inadequate maintenance and care. Decimator Design shall not be obligated to furnish service under this
warranty a) to repair damage resulting from attempts by personnel other than Decimator Design
representatives to install, repair or service the product, b) to repair damage resulting from improper use or
connection to incompatible equipment, c) to repair any damage or malfunction caused by the use of non-
Decimator Design parts or supplies, or d) to service a product that has been modified or integrated with other
products when the effect of such a modification or integration increases the time of difficulty of servicing the
product.
10
DMON-4S OPERATING MANUAL VERSION 2.0
Copyright © 2015-2023 Decimator Design Pty Ltd, Sydney, Australia
E&OE