Airflow AFLR48 Installation Instructions - Page 2

Browse online or download pdf Installation Instructions for Fan Airflow AFLR48. Airflow AFLR48 4 pages. Ceiling sweep fan

Print Page

AFLR48

1.0 Mounting the Fan Support Bracket

Select a suitable location to mount the fan support bracket.

The mounting bracket must be fixed to a solid structural member

such as a ceiling joist or a securely fixed noggin and be capable

of supporting 15kg.

Additionally, it must be located so as to provide the blade with a

minimum clearance from the floor of 2100mm, and from other

obstructions of at least 300mm.

Hangsure Mounting

Secure fixing to support 15kg

2.0 Fitting the Blades

Fit the blades onto the fan motor, as shown in Diagram 2.

Rattan blades

Fit blades with screws and washers provided as illustrated in

Diagram 2. Rattan blades may be mounted above or below the

metal brackets and blades may be mounted with either side

facing up.

2 of 4

Diagram 2

Fit canopy cover and

tighten screws

3.0 Connecting the Light Fitting

If you are attaching a light fitting to the fan, do so prior to hanging

the fan.

NOTE:

Clipper Light (CL) and Oyster Light (OL) may be installed in fans

which are constructed for this purpose.

1. Unscrew the plastic nipple from the bottom of the

motor housing.

2. Pull out the light wires from the motor housing for connection

with the lamp holder.

3. Insert the light wires through the adaptor, then screw the

adaptor into the motor shaft.

4. Connect the light wires to the lamp holder then screw the

lamp holder and the adaptor together firmly.

Light Wires

Plastic Nipple

4.0 Hanging the Fan

Hangsure Bracket

Position the ball-joint in the bracket so that the guide pin on the

bracket engages in the slot of the ball-joint.

Guide Pin

5.0 Connecting the Fan

All Airflow Ceiling Sweep Fans are pre-wired to allow for a light to

be fitted onto the fan.

If you are not fitting a light to the fan, please disregard the light

wires. The wires are connected to the incoming wiring as

illustrated in the below diagram.

SWITCHED

BROWN

ACTIVE (Fan)

BLUE

NEUTRAL

BLACK

SWITCHED ACTIVE

RED

(Optional Light)

GREEN

EARTH

Ceiling Sweep Fan Installation Instructions

Light Wires

Adaptor

Lamp Holder

Slot