JAKKS Pacific EZ Pro Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Music Mixer JAKKS Pacific EZ Pro. JAKKS Pacific EZ Pro 4 pages. Dj mixer

Print Page

GETTING STARTED

DOWN LO A D IN G A P P
1. Open App Store or Google play market on the supported device.
Please refer to "System Requirements" on page 2 of EZ Pro™ DJ instruction manual for a list of supported devices.
2. Search and install the FREE "EZ Pro™ DJ" app.
NOTE- An additional cost may be incurred by downloading/going online. Check your data charges with your network provider.
BAT TER Y IN STA LLA TIO N
Requires 3 "AA" alkaline batteries. When performance diminishes, replace with new batteries.
ALWAYS Power off the unit when not in use to preserve battery power.
ADULT INSTALLATION REQUIRED
1. Locate the BATTERY COMPARTMENT on bottom of the
unit.
2. Using a Phillips head screwdriver, remove the SCREW and
BATTERY DOOR.
3. Install 3 new "AA" batteries, matching polarity icons with
those on the BATTERY COMPARTMENT.
4. Replace the BATTERY DOOR and tighten the SCREW.
BATTERY SAFETY INFORMATION
WARNING!
Battery acid leakage can cause personal injury and cause damage to the
product and surrounding property. If battery leakage occurs, thoroughly
wash any affected skin, making sure to keep battery acid away from eyes,
ears, nose and mouth. Immediately wash any clothing or other surface
that comes in contact with leaked battery acid. Leaking batteries may
make "popping" sounds. Dispose entire toy according to Local, State or
Federal Battery Laws.
TO AVOID BATTERY PROBLEMS:
- NEVER mix old and new batteries or different brands of batteries.
- NEVER mix alkaline, standard (carbon-zinc), rechargeable
(nickel-cadmium) batteries with this product.
Pag e 3
*Batteries not included.
- NEVER dispose of batteries in fire, as they may leak and explode.
- NEVER use rechargeable batteries.
- NEVER attempt to charge non-rechargeable batteries.
- ALWAYS remove exhausted batteries from toy.
- ALWAYS have an adult install batteries consistent with installation
instructions.
- ONLY use batteries specified by manufacturer.
- Batteries are to be inserted with the correct Polarity.
- The supply terminals are not to be short-circuited.
S E T -U P
1. Remove AUDIO CABLE
and SMART DEVICE STAND
from the underside of EZ Pro™ DJ Mixer.
2. Open SMART DEVICE STAND
and place both DJ
Mixer and SMART DEVICE STAND
on flat surface.
3. Insert AUDIO CABLE
into 3.5mm AUDIO PORT on
your SUPORTED DEVICE (not included) and place
SUPPORTED DEVICE on SMART DEVICE STAND
Tip:
For voice over and recording audio, purchase EZ Pro™ DJ Mic. Connect EZ Pro™ DJ Mic to DJ Mic Port
EZ Pro™ DJ Mixer.
DJ Mic Port only accepts EZ Pro™ DJ
Device
* Not included
TM
SAMPLE
1
2
3
4
SEEK
5
6
SAMPLE
SCRATCH
MIX
A
B
AUDIO CABLE
SMART DEVICE
STAND
SMART DEVICE STAND
3.5mm AUDIO JACK
.
AUDIO CABLE
Mic.
OR
* Not included
* Not included
EZ Pro™ DJ Mic
* Sold separately
TALK
REC
MIC
SCRATCH
CUE
For cueing only
* Not included
on
P a ge 4