Major Manufacturing HIT-30L-125 Instructions Manual - Page 10

Browse online or download pdf Instructions Manual for Locks Major Manufacturing HIT-30L-125. Major Manufacturing HIT-30L-125 12 pages. Template for adams rite 2190 lock

Print Page

With the same 3/16" bit in the drill, drill the remaining holes on the exterior

template. There are five holes on the template and two on the large drill

bushing. Two holes on this side are pilot holes and will be drilled out after

the clamp and template are removed from the door.

There is one last hole

to drill. With a 1/2"

twist drill, drill the

bottom hole in the

large drill bushing.

This is on the exterior

template.

After a check to make

sure all holes are

drilled and none have

been missed, remove

the clamp and

template from the

door.