Green Blue GB522 Manual - Page 2

Browse online or download pdf Manual for Weather Station Green Blue GB522. Green Blue GB522 14 pages.

Print Page
EN
WIFI weather station of smart
Technical Data and Features
Base station: Perpetual Calendar Up to Year 2099 • Day of week in 7 languages user
selectable: English, German, Italian, French, Spanish, Netherlands and Danish • Time in
optional 12/24 hour format. • Automatic calibration of network time service • The moon
phase display • Barometric pressure: Barometric pressure measurement ranges: 600
hPa/mb to 1100 hPa/mb / 17.72 inHg to 32.50 inHg / 450.1mmHg to 825.2mmHg
• Pressure alternatively in hPa/mb or inHg or mmHg • Indoor humidity measurable range:
20%RH to 95%RH • Indoor temperature: temperature measurement ranges:-20°C to 60°C
(-4°F to 140°F) • Temperature alternatively in °C or °F. • Minimum/maximum display for
humidity and temperature • The weather forecasting function (according to the change of
air pressure) • Connects directly to wifi network • Power Supply: Battery: 2 x LR6 AA and
mains adapter: DC5V 1A
Wireless Outdoor Sensor: Outdoor temperature measurement ranges: -40°C (-4°F) ~
70°C (158°F) • Outdoor measurable range: 20%RH to 95%RH • Data transmission
frequency: 433 MHz • Wireless range: max. 60 m (open area) • Batteries: 2 x LR06 (UM-3),
1.5 V (size AA) • Protection class: IPX4
Base station Appearance: Part A-Positive LCD:
A1: Weather Forecasting,
A5: Outdoor Humidity
A2: Barometric pressure
A6: Indoor Humidity
A3: Outdoor Temperature
A7: Time/Calendar / Weed
A4: Indoor Temperature
A8: Moon Phase
Part B – Back button and power B1: Keypad / B2: Battery compartment
B3: Support frame / B4: Power supply socket / B5: Mains adapter
-02 -
Part C –Wireless Outdoor Sensor:
C1: LCD display – Temperature
C2: LCD display – Humidity
C3: Transmit signal LED
INITIAL OPERATION:
• Replace Wireless Outdoor Sensor battery compartment cover , Push the Channel selector
switch in the battery compartment of the Wireless Outdoor Sensor, set the correct channel
,Insert 2 x AA batteries observing polarity [ "+" and "–" marks] • When you insert the
batteries, all the icon on the LCD display will briefly light up for 3 seconds, the Wireless
Outdoor Sensor began to switch to the normal working mode, to detect the temperature
and humidity in the environment . At this time, the sensor will transmit 1 wireless signals,
and the interval of about 1 minutes will automatically transmit the 1 wireless signal, each
transmitted 1 wireless signal emission sensor indicator will flash 1 times.• According to
the appearance of the Base Station icon shows that the power adapter is inserted into the
socket on the Base Station, and the power adapter is connected to the power supply. After
you pass on the power supply, all the symbols on the display screen will be displayed after
about 3 seconds, the base station began to switch to the normal working mode, to detect
the temperature, humidity and air pressure in the environment • The Base Station will now
start to make a connection to the outdoor remote sensor. This operation takes about 3
minutes and is displayed by a flashing reception RF antenna symbol in the "OUTDOOR"
display area on the receiver. the "OUTDOOR" display area will show an animation of the RF
antenna symbol, indicating the base station is searching for the signal from the outdoor
sensor. At the same time the base station began to establish WIFI connections (details see
the following WIFI connection description) • When the Base Station starts normal,Open the
Base Station battery compartment cover, Insert 2 x AA batteries observing polarity [ "+"
and "-" marks], The battery is a backup power supply of the Base Station, which can
ensure the normal operation of the base station after the power adapter is unexpectedly
cut off. Note: after the power adapter is disconnected, the WIFI connection of the base
station will be automatically disconnected.
Outdoor sensor transmission: • When the Base Station successfully receives signals
from the wireless sensor, the temperature and humidity of the OUTDOOR are displayed on
the OUTDOOR column of the Base Station. • The base station can connect up to 3 channel
wireless sensor registration, the use of multiple wireless sensor, the wireless sensor
channel can not choose the same channel at the same time (a total of 1, 2, 3 channel can
choose) • Press the DOWN key can switch the display of different channels of outdoor
temperature and humidity, when displaying the symbol REFRESH, will display the channel
every 5 seconds automatically switch a channel • If the Base Station failed to receive
transmission from outdoor sensor ("- -"display on the LCD), press and hold "DOWN" button
for 3 seconds to receive transmission manually. the outdoor temperature will show an
animation of the RF antenna symbol, the Base Station will re receive the wireless signal of
C4: "°C/°F" button
C5: "TX" button
C6: Channel selector switch
C7: Battery compartment
-03 -