Major Manufacturing HIT-66-266 Instructions Manual - Page 4

Browse online or download pdf Instructions Manual for Locks Major Manufacturing HIT-66-266. Major Manufacturing HIT-66-266 10 pages. Template for saflok mt-mko & daj mortise lock

Print Page

NOTE: The HIT-66 clamps

shown are not part of the

HIT-66-266 template set and

must be purchased as a

separate item.

With both clamps opened equally,

install both inside and outside

templates to the HIT-66 clamp as

shown. Do not tighten the 10-32

screws at this time. When all

screws have been loosely

installed, then it is ok to tighten.

Install the alignment

guide to either side of

the template set. This is

used to align the

template with the mortise

pocket.

Shown is a standard

mortise pocket, we will

use this as a basis for

the Saflok MT mortise

install.

PAGE 3