Major Manufacturing HIT-40AR4 Instructions Manual - Page 8

Browse online or download pdf Instructions Manual for Door locks Major Manufacturing HIT-40AR4. Major Manufacturing HIT-40AR4 10 pages. Lip strike template

Print Page

This is the area you did not cut through in the

step above. Adjust the depth of the router to

cut the thickness of the jamb material only,

this should be a cut depth of only about 1/8

inch. Use the router to nibble away this area.

Remove the router template , clean off the

lube and de-burr the sharp edges with a

scraper or a file.

Drill out the holes left by the tek screws to

3/16". These holes will be used to mount the

factory mounting bracket.

Page 8