DECKED DR6 Installation Instructions Manual - Page 12

Browse online or download pdf Installation Instructions Manual for Automobile Accessories DECKED DR6. DECKED DR6 15 pages. Ram 1500 (2019-current, new body style only)

Print Page

INSTALL: DRAWER HANDLES

• One drawer handle assembly needs to be installed.

• Save yourself the headache, watch this short installation video: DECKED.com/videohandle.

• From the underside of drawer, place the springs into the cavities on either side of the handle slots,

red spring=right spring; BAG HANDLE C.

• Install a clevis pin through each outside drawer hole and through spring; BAG HANDLE C.

• With DECKED logo facing outward, insert the handle ends behind the spring arms. Rotate the arms of the handle toward

the clevis pins, pulling the spring arm downward. When the handle hole is lined up with the clevis pin, push the pin

through the handle hole and through the inside drawer hole. Repeat on the other side of the handle.

• Install a hair pin through the clevis pin; BAG HANDLE C.

TOP VIEW

WRONG:

SPRING ARM IS HERE

(NOT FULLY HORIZONTAL)

WRONG:

SPRING ARM OUT

OF HANDLE NOTCH

8-15-2018

www.mopar.com

NOTE: Each spring arm should point inward, not outward.

CORRECT:

SPRING ARM IS HERE

(FULLY HORIZONTAL)

CORRECT:

SPRING ARM FITS

IN HANDLE NOTCH

HANDLE OVERVIEW

SPRING ARMS

POINT INWARD

HELPFUL TIP: MAKE SURE SPRINGS HAVE

THE LONG ARM HORIZONTAL AND SHORT LEG

VERTICAL BEFORE INSERTING HANDLE

SPRING

NOTCHES

K68622704