Major tech MT26 Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Measuring Instruments Major tech MT26. Major tech MT26 20 pages. 600v ac/dc bluetooth multimeter

Print Page

1. INTRODUCTION

The MT26 is a CAT III 600V True RMS compact multimeter offering

measurements of AC and DC voltage, AC and DC current, frequency,

capacitance, resistance and temperature. The meter has a large 4000

count backlit LCD with the added advantage of an analogue bar graph.

The Low Z function has a low pass filter to eliminate errors caused by

"Ghost" voltages. There is a built-in LED flashlight for dimly lit areas and a

tilt stand. The Bluetooth function allows the user to transmit data to the

Android or iOS mobile App for viewing, organising and sharing recordings.

The meter has a double moulded rubber case with IP67 waterproof and

dustproof rating.

WARNINGS

• Read, understand and follow Safety Rules and Operating Instructions in

this manual before using this meter.

• The meter's safety features may not protect the user if not used in

accordance with the manufacturer's instructions.

• Ensure that the test leads are fully seated in the input jacks and keep

fingers away from the metal probe tips when taking measurements.

• Before changing functions using the selector switch, always disconnect

the test leads from the circuit under test.

• Use only UL listed test leads with the proper safety category rating.

• Comply with all applicable safety codes. Use approved personal

protective equipment when working near live electrical circuits-

particularly with regard to arc-flash potential.

• Use caution on live circuits. Voltages above 30V AC RMS, 42V AC peak,

or 60V DC pose a shock hazard.

• Do not use if the meter or test leads appear damaged.

• Verify operation before using meter by measuring a known live voltage.

• Do not use the meter in wet or damp environments or during electrical

storms.

• Do not use the meter or near explosive vapors, dust or gasses.

• Do not use the meter if it operates incorrectly. Protection may be

compromised.

• Do not operate meter while Low Battery warning is on. Replace batteries

immediately.

• Do not apply voltage or current that exceeds the meter's maximum

rated input limits.