Major tech MT715 Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Measuring Instruments Major tech MT715. Major tech MT715 16 pages. Ac trms open jaw clamp meter

Print Page

6. Button

• Press MODE and Backlight Button to select OHM/Diode/Continuity/CAP/

LoZ AC/DC Voltage.

• Press the MODE and Backlight button for over 1 second to turn the

button, Knob and Rotary light on.

• Press again for over 1 second to turn the button, Knob and Rotary light

off.

• Press MAX/MIN Button the maximum and minimum values are

measured.

• This mode is activated on each measurement except for continuity test,

diode test, capacitance test and AUTO SENSE Voltage mode.

• This mode is disabled keeping pressed MAX/MIN Button or moving the

rotary switch.

• To freeze the LCD reading, press the HOLD and Flashlight Button.

• While data hold is active, the HOLD icon appears on the LCD.

• Press the HOLD and Flashlight Button again to return to normal.

• Press the HOLD and Flashlight Button for over 1 second to turn the light

on.

• Press again for over 1 second to turn the light off.

• In order to conserve battery life, the meter will automatically turn off

after approximately 15 minutes.

• To turn the meter on again, turn the function switch to the OFF position

and then to the desired function position.

• To press and hold the MODE and Backlight Button to turn the

system on, the auto power off function will be cancelled.