IKEA FRAMTID HGC4T User Manual - Page 9

Browse online or download pdf User Manual for Oven IKEA FRAMTID HGC4T. IKEA FRAMTID HGC4T 48 pages. Hob
Also for IKEA FRAMTID HGC4T: Instruction Manual (20 pages)

Print Page

ENGLISH

Technical data

Rating Plate

Made in Germany

901.560.49

21552

PQM

The graphic above represents rating plate of

the appliance (without serial number which is

generated dynamically during the production

process), which is located at its underneath

surface of the casing.

Installation

Manufacturer is not responsible for any injury

to persons and pets or damage to property

caused by failure to comply following require-

ments.

Caution! To proceed with the installation

refer to the assembly instructions.

Warning! Installation process must follow

the laws, ordinances, directives and

standards (electrical safety rules and

regulations, proper recycling in accordance

with the regulations, etc.) in force in the country

of use!

Warning! The appliance must be

earthed!

Warning! Risk of injury from electrical

current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of volt-

age.

Model FRAMTID HGC4T Typ 55HAD64AO 6.5kW

PNC 949 593 108 S NO ...................... 220V-240V AC 50 Hz

Dear Customer, please apply here aside the

sticker you can find in the dedicate plastic bag

inserted inside the hob packaging. This will al-

low us to assist you better, by identifying pre-

cisely your hob, in case you will need in future

our assistance. Thank you for your help!

• Loose and inappropriate plug and socket

connections can make the terminal over-

heat.

• Have the clamping connections correctly in-

stalled.

• Use strain relief clamp on cable.

• Follow the connection diagram (it is located

on the underneath surface of the casting of

the hob).

Important! You must observe the minimum

distances to other appliances and furniture

cabinets or other units according to Assembly

Instruction.

If there is no oven beneath the hob insert a di-

viding panel at a minimum distance of 20 mm

from the bottom of the hob.

230 V

DGT