ENGLISH
Clock functions
Sym-
Function
bol
Minute Minder
Time of day
Duration
End
Press
again and again to change
the clock function.
Press
to confirm the settings of the
clock functions, or wait 5 seconds for
the setting to be confirmed automatically.
Setting the Duration or End function
during cooking function
1. Press
again and again until the sym-
bol
or
flashes in the display.
2. Press + or - to set the minutes.
3. Press
to confirm.
4. Press + or - to set the hour.
5. Press
to confirm.
6. When the set time ends, the symbol
or
and the set time flash. The acous-
tic signal sounds for two minutes. The
appliance deactivates. Press a button
or open the appliance door to stop the
signal.
If you press
for Duration
switches to setting the End
Setting the Minute Minder
Used to set a countdown time. The maxi-
mum time you can set is 23 hours 59 mi-
nutes. This function has no effect on the op-
eration of the oven. You can set the Minute
Minder at any time, also if the appliance is
off.
To set a countdown time.
To set, change or check the time of day. Refer to "Setting the
time of day".
To set how long the appliance must operate. First set an oven
function before you set this function.
To set when the appliance must be deactivated. First set an
oven function before you set this function. You can use Dura-
tion and End at the same time (Time Delay) to set the time
when the appliance must be activated and then deactivated.
while setting the time
, the appliance
function.
Description
1. Press
again and again until
00 flash in the display.
2. Press + or - to set the Minute Minder. At
first the time is calculated in minutes
and seconds. When the time you set is
longer than 60 minutes, the symbol
comes on in the display. The appliance
then calculates the time in hours and
minutes.
3. The Minute Minder starts automatically
after five seconds.
4. When the set time ends, the acoustic
signal sounds for two minutes. 00:00
and
flash in the display. Press a but-
ton to stop the signal.
If you set the Minute Minder when the
Duration
or End
ates, the symbol
Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates.
Press
again and again until the display
shows time without clock symbols.
You cannot use the Count Up Timer
when the Duration
tion operates.
and
function oper-
comes on in the display.
or End
func-
12
Print Page