Airflow LA BRISA Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Fan Airflow LA BRISA. Airflow LA BRISA 12 pages. Fans

Print Page
Proceed with installation as follows:
Step 7. Attach the bracket to the ceiling fixture outlet
box with the mounting hardware included with the outlet
box.
Tighten the screws firmly by hand only, being careful not
to bend the bracket by over tightening.
NOTE: On sloped ceilings, align the canopy
opening towards the top or room peak.
CAUTION: To reduce the risk of
personal injury, use only the
mounting hardware provided with
the approved outlet box to install
the crossbar mounting bracket.
Step 8. To hang the fan body in the mounting
bracket, hold the fan body firmly and insert
the ball into the bracket opening. Check that
no wires were pinched. Rotate the fan body
until the slot in the nylon ball fits into the
pin opposite the bracket opening.
NOTE: Please see chart on Page 8
for fan weights.
Step 9a. Attach the fan wires to the ceiling fixture
outlet box wiring by twisting the bare ends of the
wires together and then securing with a wire nut. Test
that the connection is secure by pulling on the wire
nut. Connect in this order:
Step 9b.
• GREEN leads from mounting plate and fan to GROUND
conductor of power source. Secure with wire nut.
• WHITE wire from fan to white NEUTRAL wire in ceiling
fixture outlet box. Secure with wire nut.
• BLUE wire and BLACK power wire from fan to BLACK
power wire in ceiling outlet box. Secure with wire nut.

MOUNTING BRACKET INSTALLATION

HANGING THE FAN

BALL
D1
OPTION
WIRE

ELECTRICAL CONNECTIONS

D1-OPTION
CEILING FAN
APPROVED
OUTLET BOX
CEILING
WIRING
FLAT
WASHER
SLOT
CAPPED BLUE D1-OPTION WIRE ON 3-SPEED ONLY
FOR INDEPENDENT W-80 LIGHT CONTROL
BLUE
WIRE
2 WHITE WIRES
MOUNTING
BRACKET
GREEN
GROUND
APPROVED
WIRE
OUTLET
BOX
HARDWARE
PIN
WIRE NUT
2
BLACK
WIRES
2
GREEN
WIRES
5