Green Creative ATOM Track Installation Manual - Page 2

Browse online or download pdf Installation Manual for Lighting Equipment Green Creative ATOM Track. Green Creative ATOM Track 5 pages.

Green Creative ATOM Track Installation Manual
1.
Make sure the fixture's adapter is an H type and compatible with the H track system. (fig. 1)
Note: the H type adapter is only compatible with singie-circuit track types.
2.
Insert the head of adapter into the slot of the track rail making sure the locking tabs are parallel with the track's polarity line. Note: the grounding contact direction. (fig. 2)
3.
While holding the adapter aligned with the track, push the fixture upward. Then while pulling down on the adapter sleeve twist the body of the fixture 90 degrees until the
locking tabs on both sides of the adaptor snap into the track groove. (fig. 3)
Note: the ground pin needs to be touching the grounding pin. (fig. 4)
The adapter only rotates in one direction. Do not forcefully rotate the adapter in the wrong direction as it may damage it.
Removing the lamp
1.
While holding the fixture in place, pull the adapter sleeve held down and gently twist the fixture 90 degrees until it can easily be removed from the track groove.
1.
Make sure the fixture's adapter is a J type and compatible with the J track system. (fig. 1)
Note: the J type adapter is compatible with single or two-circuit track types. Simply lift the contact to its up position for two-circuit application.
2.
Insert the head of adapter into the slot of the track rail making sure the locking tab is parallel to the track's polarity line. Note: the grounding contact direction. (fig. 2)
3.
While holding down the lock tab with your thumb, push the fixture upward, then twist the body of the fixture 90 degrees until the locking tab on the adapter snaps into the track
groove. (fig. 3)
Note: the ground pin needs to be touching the grounding pin. (fig. 4)
The adapter only rotates in one direction. Do not forcefully rotate the adapter in the wrong direction as it may damage it.
Removing the lamp
1.
While holding the fixture in place, pull the lock tab down and gently twist the fixture 90 degrees until it can easily be removed from the track groove.
www.greencreative.com - [email protected] - Tel / Fax: (866) 774-5433 -
For use with ATOM track series.
H
/ GREENCREATIVELED
/ GClightingLED
/ GREEN-CREATIVE
An ILLUMUS Brand