Jam HX-P250 Replay User Manual And Warranty Information - Page 2
Browse online or download pdf User Manual And Warranty Information for Speakers Jam HX-P250 Replay. Jam HX-P250 Replay 3 pages.
Print Page
BLUETOOTH
CONNECTION, CONTINUED
®
The device and Bluetooth will find each other every time, as long as the
speaker is set to Bluetooth and your device's Bluetooth is, you know, on.
If you're connecting to a computer, you may have some extra steps on
that end. You'll have to get that information from the computer compa-
ny.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter "0000" as the code.
To disable pairing of an existing device and pair a new device, press and
hold the - and + buttons for 5 seconds to activate pairing mode.
Note: If you turn on your Replay but haven't started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the Jam Replay will automatically shut off to preserve battery power.
HOOKING UP OLD-SCHOOL AUDIO, JACK
1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up —
or down if you're lame.
You'll have to play and pause the music from
your device, not your speaker. No problem.
You're there anyway, right?
HELLO? SPEAKERPHONE? YES!
When friends call asking to join the party — and you know they will — answer the phone without disconnecting from your JAM
Replay. Yes, that's right. Your speaker is a speakerphone, too. How amazing is that? Here's how it works:
1. Make sure your phone and speaker are connected through Bluetooth.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Replay.
3. If you'd rather not talk, hold down the PLAY/PAUSE button on your Replay for 3 seconds to ignore the call.
THE COOLEST PART: The Replay knows when a call is coming in and pauses the music before ringing. When you hang up, the music
starts where it left off — and so does the party. If it's you making the call, just start dialing from your phone, and the Replay
automatically does its hands-free thing. Isn't it refreshing to know your speaker totally gets you?
Check out the chart below for a complete guide on handling calls with your Replay.
Situation
1
Incoming call
st
On call
2
Incoming call
nd
Both calls active
THE VOICE FROM WITHIN
When your JAM Replay isn't rocking out, it can tell you all
sorts of things it's doing: when it's powering on, ready to pair,
paired, at maximum volume, charging, recieving a call, ending
a call, rejecting a call, and powering off.
Just like the global gadget it is, your speaker toggles between
several languages or no language at all. Your speaker can
parlay with you in English, Spanish, French, or Portuguese.
Making the change between language and tone is as simple
as pressing the + and - buttons at the same time. Click
though until the speaker starts speaking your language.
CHARGE
AUX
Short Press Play/Pause Button
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
COMING CLEAN
A soft, dry towel is all you need to
clean off your speaker. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don't do it.
Long Press Play/Pause Button
Move call from speaker to device
Switch between 1
1 YEAR LIMITED WARRANTY
For detailed warranty instructions and information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: canada.jamaudio.com/warranty-1yr
To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email
for assistance (you can find their contact info on page 1).
Please make sure to have the model number of the
product available.
2m
15m
Reject call
Reject call 2
call and 2
call
st
nd