ENGLISH
steam to exit gradually before
accessing the cavity - risk of
burns. Do not obstruct hot air
vents at the front of the oven -
risk of fire.
Exercise caution when the
oven door is in the open or down
position, to avoid hitting the
door.
PERMITTED USE
CAUTION: the appliance is
not intended to be operated by
means of an external switching
device, such as a timer, or
separate remote controlled
system.
This appliance is intended
to be used in household and
similar applications such as: staff
kitchen areas in shops, offices
and other working environments;
farm houses; by clients in hotels,
motels, bed & breakfast and
other residential environments.
This appliance is not for
professional use. Do not use the
appliance outdoors.
No other use is permitted (e.g.
heating rooms).
Do not store explosive or
flammable substances (e.g.
gasoline or aerosol cans) inside
or near the appliance - risk of
fire.
INSTALLATION
The appliance must be
handled and installed by two or
more persons - risk of injury. Use
protective gloves to unpack and
install - risk of cuts.
Installation, including water
supply (if any) and electrical
connections, and repairs must
be carried out by a qualified
technician. Do not repair
or replace any part of the
appliance unless specifically
stated in the user manual.
Keep children away from the
installation site. After unpacking
the appliance, make sure that
it has not been damaged
during transport. In the event of
problems, contact the dealer or
your nearest After-sales Service.
Once installed, packaging
waste (plastic, styrofoam
parts etc.) must be stored out
of reach of children - risk of
suffocation. The appliance must
be disconnected from the power
supply before any installation
operation - risk of electrical
shock. During installation, make
sure the appliance does not
damage the power cable - risk
of fire or electrical shock. Only
activate the appliance when the
installation has been completed.
Carry out all cabinet
cutting works before fitting the
appliance in the furniture and
remove all wood chips and
sawdust.
Do not obstruct the minimum gap
between the worktop and the
5
Print Page