Majorcom: EMAGP16 User Manual - Page 8

Browse online or download pdf User Manual for Microphone system Majorcom: EMAGP16. Majorcom: EMAGP16 13 pages.

Print Page

EMAGP16

OPERATING THE UNIT

6.1. SENDING MESSAGES

Sending voice messages via an EMAGPE16paging station is done according to the following

procedure:

1. Visual check of the available/busy status of the zones (LED indicators)

2. Select the message destination zones by pressing the corresponding keys

3. Press and hold the PAGE key for the duration of the voice message

4. Release the PAGE key

5. Press the CLR (CLEAR) key if you want to cancel the last zone selection.

However, this process and its functional results when sending messages depend on the

programming of the messaging module (PAGERS/DUCKERS) in the ePXN1616, PXN88,

PXN88SG or PXN1212SG matrix unit to which the EMAGPE16paging station is connec-

ted. This programming is done through the web application embedded in ePXN1616 or

with MAJORCOMNet Manager when used with PXN matrices. Refer to the ePXN1616

Web Application manual / MAJORCOMNet Manager user manual for more information.

6.2. DISPLAY AND USER KEYS

The electronic ink display on the front panel shows the names of the zones enabled for paging.

These names are automatically imported from the names assigned to the outputs of the ePXN1616

or PXN matrix unit to which the EMAGPE16paging station is connected. In the case of zones not

enabled for paging, the display will show "---".

There are 21 user keys on the front panel of the unit:

• K eys for selecting the message destination zones. They behave like a "toggle" switch, i.e.

successive keystrokes activate and deactivate the selection of a zone. In the ePXN1616

web application or MAJORCOMNet Manager application (for PXN matrices), the zones

you can send your messages to (zones enabled for each paging station connected to an

ePXN1616 or PXN unit) are programmed, so that non-enabled zone keys are unavailable

from these keys in the paging station.

• " F1" and "F2" keys: zone group selection keys

• " ALL" key: selects all zones that are enabled for the paging station (equivalent to pressing

individually all enabled-zone keys)

• " CLR" key: disables all selected zones, leaving the paging station with no zones selected.

Usermanual V1.1

56, chemin

de la Flambère ·

F a x 3 3 ( 0 ) 5 6 1 3 1 8 7 7 3 · [email protected] ·

31300 Toulouse ·

FRANCE · T é l . 3 3 ( 0 ) 5 6 1 3 1 8 6 8 7

www.majorcom.fr

• " PAGE" key: when pressed and held down, it activates the voice message transmission

function to the selected destination zones. If a "ding-dong" or "chime" melody has

been programmed in the paging station, it is emitted when the PAGE key is pressed,

and it is advisable to wait until it is finished before starting the voice message.

Note:

all functions of the above keys are configured from the ePXN1616 web application or

MAJORCOMNet Manager application (for PXN units).

6.3. LED INDICATORS

Two-color LED indicators for zone selection keys (1 to 16). Possible states and their meaning:

• U nlit: free zone (not used by another paging station or priority module, if any)

• L it in green: zone selected by the paging station to broadcast the next message

• L it in red: zone not selected in the paging station, but hold by another paging station

or module with higher priority

• F lashing in orange: zone selected by the paging station, but hold by another paging

station or module with higher priority

• L it in orange: the broadcast of a message has been interrupted by another paging

station or priority module, totally or partially, and this lit LED warns the user that

the message has not been fully broadcasted in that destination zone (regardless of

whether it has been broadcasted in other zones or not). The LED status is reset by

pressing the corresponding zone selection key, the ALL key or the CLR key.

• T emporarily flashing in green: indicates a zone not enabled for selection from the pa-

ging station

Two-color LED indicators on the PAGE key. Lights while holding down the PAGE key to indi-

cate that the paging station is in a message send mode:

• L it in orange: when you start sending a message (pressing and holding the PAGE key),

it indicates that the chime melody is playing (as determined with the web control appli-

cation), then turns green when the chime has finished playing. Thus, the speaker knows

when the chime ends and can start its message without the risk of being covered by

the chime

(*)

• L it in green: paging function activated, with voice message broadcasting to selected

destination zones