IKEA MIRAKULOS User Manual - Page 11

Browse online or download pdf User Manual for Oven IKEA MIRAKULOS. IKEA MIRAKULOS 48 pages. Built-in oven
Also for IKEA MIRAKULOS: User Manual (28 pages), Installation And User Manual (32 pages), Owner's Manual (28 pages), User Manual (28 pages), Manual (28 pages), Manual (32 pages), Manual (24 pages)

IKEA MIRAKULOS User Manual
ENGLISH
right to show the oven temperature on the
display.
Steam Cooking
1. Set the function
2. Press the cover of the water drawer to
open it. Fill the water drawer with wa-
ter until the Tank Full indicator comes
on. The maximum capacity of the tank
is 950 ml. It is sufficient for approxi-
mately 55 - 60 minutes of cooking.
Important! Do not put water directly into
the steam generator.
Use only water as the liquid. Do not use fil-
tered (demineralised) or distilled water. Do
not use other liquids.
Do not put flammable or alcoholic liquids
(grappa, whisky, cognac, etc.) into the wa-
ter drawer.
3. Push the water drawer into its initial po-
sition.
4. Prepare the food in the correct cook-
ware.
5. Set the temperature between 130 °C
and 250 °C. Refer to table for steam
cooking.
6. Empty the water tank after the steam
cooking is completed.
Warning! Wait a minimum of 60
minutes after each use of the Forced
Air + Steam function in order to prevent hot
water from exiting the water outlet valve.
Water Tank indicator
When the Steam cooking operates, the dis-
play shows water tank indicator. Water
tank indicator shows the level of the water
in the tank.
— Water tank is full. An acoustic sig-
nal sounds when the tank is full.
— Water tank is half full.
— Water tank is empty. An acoustic
signal sounds when the tank must be re-
filled.
.
If you put too much water into the tank,
the safety outlet moves the excess wa-
ter to the bottom of the oven.
Remove the water with a sponge or cloth.
Emptying the water tank
Important! Make sure that the appliance is
cool before you start to empty the water
tank.
1. Prepare the draining pipe (C), included
in the same package with the user
manual. Put the connector (B) onto one
of the ends of the draining pipe.
A
B
C
2. Put the second end of the draining pipe
(C) into a container. Put it at a lower
position than the outlet valve (A).
3. Open the oven door and put the con-
nector (B) into the outlet valve (A).
4. Push the connector again and again
when you empty the water tank.
5. Remove the connector from the valve
when the water stops flowing.
Warning! Do not use the drained
water to fill the water tank again.
The water tank can have some water
when the display shows
Wait until the water flow from the water
outlet valve stops.
11
symbol.