IKEA MUTEBO Manual - Page 13

Browse online or download pdf Manual for Oven IKEA MUTEBO. IKEA MUTEBO 44 pages.
Also for IKEA MUTEBO: Manual (28 pages), Manual (12 pages)

Print Page

ENGLISH

Put the test paper

into water for about

1 sec. Do not put the

test paper under

running water.

The colours of the test paper continue to change. Do not check water hardness later

than 1 min after test.

You can change the water hardness level in the menu: Settings / Setup / Water hardness.

The table shows water hardness range (dH) with the corresponding level of Calcium deposit

and the water classification. Adjust the water hardness level according to the table.

Water hardness

Level

0 - 7

8 - 14

15 - 21

≥22

When the tap water hardness level is 4, fill the water drawer with still bottled water.

Daily use

Warning! Refer to Safety

chapters.

How to set: Heating functions

Step 1

Turn on the oven. The display shows the default heating function.

Step 2

Press the symbol of the heating function

Step 3

Select the heating function and press:

Step 4

Set: temperature. Press:

Step 5

Press:

Food Sensor - you can plug the sensor at any time before or during cooking.

Shake the test paper

to remove the excess

of water.

Test paper

After 1 min, check

water hardness with

the table below.

Calcium deposit

Calcium depos‐

(mmol/l)

0 - 1.3

1.4 - 2.5

2.6 - 3.8

≥ 3.9

to enter the submenu.

. The display shows: temperature.

Set the water hardness

level: Menu / Settings /

Setup / Water hard‐

ness.

Water classifi‐

it (mg/l)

cation

0 - 50

51 - 100

moderately

hard

101 - 150

hard

≥151

very hard

soft