Bermar BRC1003 Step-By-Step Manual - Page 7

Browse online or download pdf Step-By-Step Manual for Inverter Drive Bermar BRC1003. Bermar BRC1003 10 pages.

Print Page
Figure 1-3 Using the Keypad
Required
6
Enable
Run
Required
Settings Key
Stop / Reset Key
UP / DOWN
Keys
UP & DOWN
Keys
Press and Hold
Running
Used to navigate through the drive's parameter settings and rotate
displayed parameters when the drive is running.
Used to reset the drive if there is an error and to stop the drive
running if enable/run configuration is set appropriately.
Used individually to increase or decrease editable values shown on
the drive display.
When both keys are pressed together, they provide the drive with a
latched RUN signal if enable/run configuration is set appropriately.
On the diagram above this indicates that the key should be pressed
and held for 1 second as opposed to a normal short press.
Inverter BRC10 Step by Step Guide