Deco Gear DGBB01 Assembly Instructions Manual - Page 8

Browse online or download pdf Assembly Instructions Manual for Game Deco Gear DGBB01. Deco Gear DGBB01 14 pages. Luxury dual hoops electronic basketball game

Print Page

STEP 6

Attach

P12 Rim and P14 Rim Support Plate

to the P7 Backboard using H3 Bolts, H7 Lock

Washers and H5 Wing Nuts as shown

in FIGURE 6.

Attach P11 Mechanical Scoring Arms and P18

Mechanical Scoring Arm Support Plates to the

P7 Backboard using H3 Bolts H7 Lock washers

and H5 Wing nuts as shown in FIGURE 6.

Use T1 Phillips Allen Wrench and Plyers

(not provided) to tighten all Bolts.

STEP 7

Attach P9 Electronic Scorer and P10 Electronic

Scorer Face Plate to P7 Backboard as shown

in FIGURE 7.

NOTE: Place P10 Electronic Scorer Face Plate

into P7 Backboard first, then carefully "press"

P9 Electronic Scorer onto the four tabs on P10.

You should hear the four tabs "snap"

into place.

Loop the P13 Rim Net through the ram horns

on the P12 Rims as shown in FIGURE 7.

P18

NOTE:

P11 Mechanical Scoring Arm

sensor plug must pass through

P7 Backboard and P18 Mechanical

Scoring Arm Support Plate.

NOTE:

Remove Protective

Coating before

assembly.

Net does have a

top and bottom,

The long loops go

to the top.

P14

P11

Note: This is a special rim net

designed to avoid entanglement

with the mechanical scoring arm.`

FIGURE 6

P12

FIGURE 7

P13

P10