Deco Lighting Small Gladetino Installation Manual - Page 2

Browse online or download pdf Installation Manual for Outdoor Light Deco Lighting Small Gladetino. Deco Lighting Small Gladetino 4 pages.

Print Page

Small

Gladetino

Mounting Options

Slipfitter:

1. Align the Slipfitter mounting holes with the (2) mounting holes on the rear side of the luminaire housing. (Fig. 4)

Fig. 4

2. Place the Slipfitter against the housing, and route the Line, Neutral, and Ground wires through the arm.

3. Fasten the arm to the housing using (2) included 1/4-20 bolts. (Fig. 5)

4. Loosen the (4) set screws on the sides of the arm so that the pole will not interfere with the bolts.

5. Connect the Line, Neutral, and Ground wires from the pole to the luminaire using the appropriate connectors.

6. Slide the pole completely into the arm and ensure that the luminaire is at the desired angle.

7. Tighten the (4) set screws to fasten the luminaire to the pole.

Pole Mount:

1. Drill (1) wire hole and (2) mount holes into the pole, at the dimensions shown in the diagram.

2. Align the Pole-Mount mounting holes with the (2) mounting holes on the top of the rear side of the luminaire housing. (Fig. 6)

Deco Lighting practices a program of continuous product improvement, and as a result product specifications change frequently. We reserve the right to change

product specifications without notice. Contact Deco for the latest product information.

Dimensional Drawings

2917 Vail Ave., Commerce, CA 90040 • (800)613-DECO (3326) • [email protected] www.getdeco.com

Fig. 5

Designed for 2-3/8" OD Pole