Jam D1200 Owner's Manual - Page 4
Browse online or download pdf Owner's Manual for Amplifier Jam D1200. Jam D1200 6 pages. Professional power amplifier
Print Page1-3 System Connection
In standard operating mode, you can connect 2 audio sources, usually one for left channel and the other to for right channel. You
should connect the audio source to inputs A and B, The corresponding outputs should be connected to outputs A and B.
Be sure to use a minimum impedance of 2 ohms per channel. (4 ohms recommended for best results)
•
Check your cabling before powering on the amplifier to ensure there are no short-circuits or other cross wiring.
•
Do not connect/disconnect under load. Always turn down volumes before connecting or disconnecting any inputs or
•
outputs to avoid the possibilities of damage.