Bermuda BER0150 Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Swimming Pool Filter Bermuda BER0150. Bermuda BER0150 8 pages.

Print Page

Thank you for purchasing a Bermuda Pond Skimmer. To ensure that

this product is safely and correctly used, and at its optimal performance,

please read this instruction booklet carefully before use.

Attention

1. Keep out reach of children

2. A drip loop should be installed in the

power cable to ensure that water cannot

travel down it, and into an electrical socket.

Ensure the power cable and plug are

higher than the water level in the skimmer.

3. An RCD, (of which the rated working current is not over 30mA) must be

installed when using the skimmer / pump, and the power sockets must be

connected to an Earth.

4. The pump included inside the Bermuda Pond Skimmer is designed for

outdoor, underwater use only. Do not run the pump dry.

5. Do not use this pond skimmer when there is a lot of solid sludge in the

pond, or when water temperature is higher than 40°C.

6. Always disconnect the power supply when handling, servicing or

maintaining the skimmer / pump.

7. Do not attempt to unplug or unwire the skimmer / pump with wet hands.

8. Do not carry or retrieve the skimmer / pump by the electrical cables.

9. Power cables to the skimmer / pump cannot be replaced. If damaged or

cut too short, discard the unit. Do not attempt to access the electricals

inside.

10. The depth of water in the pond must be higher than the pond skimmer,

do not use this pond skimmer when the water level is too low.

11. Only use in pond water, do not use in any any other liquid or chemicals.

Outlet is higher than

the highest water level

Drip loop